01/25/2022 | MTM-Easy at the LeanBaseAward 2022

The German LEAN community will meet on March 17 and 18 at LATC2022 in the Maimarktclub in Mannheim. The highlight of the hybrid event is the presentation of the LeanBaseAward. Among the finalists is the MTM ASSOCIATION e. V., which entered the race with its cloud-based software solution MTM-Easy®. Those who would like to support the…


01/24/2022 | STIHL Tirol GmbH is now "approved by MTM ASSOCIATION"

At the group headquarters of power tool manufacturer STIHL in Waiblingen, Baden-Württemberg, the MTM method standard has long been established. Since the end of 2021, the Austrian site STIHL Tirol GmbH has also had it in writing: With the seal of approval "approved by MTM ASSOCIATION", the industry association confirms the company's…


01/21/2022 | More than 5,000 participants certified around the world

"The digitization of MTM training and the consistent implementation of the internationally standardized training program have taken the One-MTM partner network a decisive step forward," says Dr. Thomas Finsterbusch, head of the MTM Academy, commenting on the figures for the 2021 training year.


12/13/2021 | Green light for new membership structure and internationally staffed Executive Board

As in the previous year, the MTM ASSOCIATION e. V. General Meeting 2021 was held with a written ballot. The amendments to the Articles of Association, which were carried by a large majority, reflect the issues of internationalization and the attractiveness of membership in the MTM ASSOCIATION e. V. In the future, a distinction will…


12/12/2021 | EAWS: MTM ASSOCIATION e. V. takes over further development of ergonomics standard

EAWS (Ergonomic Assessment Work Sheet) is the internationally recognized standard for assessing the ergonomic risk of activities at workplaces. The MTM Association Italy has now officially handed over the management and further development of the ergonomics standard to the MTM ASSOCIATION e. V.


12/10/2021 | MTM in LeanTalk: Yes, they still exist!

Did you know that IBM Germany, Singer Nähmaschinenfabrik AG and Vorwerk Group & Co. are among the founding members of the MTM ASSOCIATION e. V.? Ralf Volkmer, Lean Knowledge Base, and Prof. Dr. Peter Kuhlang, MTM ASSOCIATION e. V., talked about what drove these and other companies to apply the MTM process and to promote its further…


12/05/2021 | ema Work Designer speaks MTM-HWD

The "approved by MTM ASSOCIATION" seal of approval will in future identify tested software and consulting products in the MTM environment. The MTM ASSOCIATION e. V., which awards this seal of approval on the basis of defined criteria, is thus making an important contribution to the standardized and correct dissemination of MTM…


12/02/2021 | "MTM-HWD marks the beginning of a new era in work design"

Knuth Jasker, former managing director of Deutsche MTM-Gesellschaft mbH and co-developer of the new MTM-HWD® process building block system, described the official handover of the results of the Human Work Design (HWD®) development project to MTM ASSOCIATION e. V. as a "historic moment for industrial engineering". The project steering…


11/17/2021 | MTM-Easy is nominated for the Lean Base Award 2022

MTM ASSOCIATION e. V. is entering the LeanBaseAward 2022 with MTM-Easy®, the new software solution for the quick and easy determination of assembly times. The Lean community awards this prize to companies and institutions that have made outstanding contributions to the introduction of Lean Management principles of thought and action.…


11/11/2021 | "MTM – oh, they're still around too?"

Why can the lean community do so little with the MTM application? Already at the virtual LeanStammtisch in September, the Lean Community discussed this question with Prof. Dr. Peter Kuhlang, among others – on December 5, 2021, starting at 11 a.m., the CEO of MTM ASSOCIATION e. V. will be a live guest on LeanTalkTV. In conversation…

1 | 2 | 3 | … | 9 >

Your Contact

Ina Klose-Hegewald

Team Leader Marketing

Phone +49 40 822779-49